Friday 29 July 2011

FEDERAL POLYTECHNIC NEKEDE OWERRI.2011/2012 ADMISSION BROCHURE GUIDELINE

Federal Polytechnic Nekede
2011/2012 ADMISSION BROCHURE GUIDELINE
FULL PROFESSIONAL POST HIGHER DIPLOMA IN URBAN AND REGIONAL   PLANNING        - 2 YEARS
                                                                                                                            (24 Calendar Months)
HIGHER NATIONAL DIPLOMA (MORNING/EVENING)                                                                     - 2YEARS
NATIONAL
  DIPLOMA (EVENING/WEEKEND)                                                                                  - 2YEARS
HIGHER NATIONAL DIPLOMA (WEEKEND)                                                                                      - 2YEARS
CERTIFICATE PROGRAMME                                                                                                                As indicated
ESTABLISHMENT
The Federal Polytechnic Nekede, Owerri was initially established as the College of Technology, Owerri by Edict No. 16 dated 1st April 1978. In 1987, it was renamed, The Polytechnic by Imo State Government. The Institution was taken over by the Federal Government in April 1993 and is now governed by Federal Polytechnics Act to perform the following functions:
(a)  To provide fulltime or part-time courses of Instruction and training.
(i) In technology, applied science, commerce and management and
(ii) In such other fields or applied learning relevant to development of Nigeria in the areas of Industrial and Agricultural production and distribution and for research in the development and adaptation of techniques as the council may from time to time determine.
(b)        To arrange conferences, seminars and study groups relative to the fields of Learning specified in paragraph (a) of this section (I)
(c)        To perform such function as in the opinion of the council may serve to promote the objectives of the Polytechnic.
            The Motto of the Polytechnic is “Knowledge and Skill for Service”
LOCATION
The institution is located in Nekede about five kilometres from the metropolitan capital of Imo State, Owerri. The campus comprises some 13.8 hectares of land.
MODE OF ADMISSION
Admission of students into the Polytechnic for Post Higher National Diploma (Post-HND) in Urban and Regional planning, the Higher National Diploma (Morning/Evening/Weekend), the National Diploma (Evening/Weekend), and Certificate programmes will be by direct entry base mainly on merit by ranking the entry qualification of candidates.
Candidates for admission are required to posses the minimum entry requirement as stipulated. The Polytechnic Prospective candidates are therefore advised to ensure that they meet both the general and departmental requirements before applying for admission.
 
 
 
DURATION OF PROGRAMME
Post Higher National Diploma (Post HND) in Urban and Regional Planning
(Morning)                                                                                -2 years (24 Calendar Month)
Higher National Diploma (Morning/Evening/Weekend)                       -2 years
National Diploma (Evening)                                                    -2 years 
National diploma (Weekend)                                                   -2 years
Certificate Programme (Continuing Education Centre)                        -1year or as indicated
 
Students who successfully complete the National Diploma Programme will be required to have gained at least one year relevant post ND working experience in a recognised industry / establishment before they can apply for admission into the Higher National Diploma programme.
 
A.     FULL PROFESSIONAL POST HIGHER NATIONAL DIPLOMA POST HND IN URBAN AND REGIONAL PLANING
 
     MINIMUM REQUIREMENT: 
                   Candidates who desire to be admitted into the Programme should posses:
i)                    A minimum of Lower Credit Level in Higher National Diploma in Urban and Regional Planning (or related discipline) of the Federal Polytechnic Nekede, Owerri or from other Polytechnic whose programme has being accredited by the NBTE and TOPREC, or B.Sc. with a minimum of Second Class Lower in Urban and Regional planning  (or related discipline) from any recognised University OR A pass in HND/BSC with a minimum of 10 years working experience in a physical planning establishment
 
ii)                  NYSC Discharge Certificate or Certificate of exemption is compulsory.
 
iii)                The programme is of a two-year full time duration, covering 24 calendar months of four semesters.
 
iv)                Applicant must be ICT compliant.
 
v)                  There must be evidence employment in a planning establishment for those with a pass certificate.
 
 
B.     HIGHER NATIONAL DIPLOMA (HND) (MORNING/EVENING/WEEKEND)-2/2/2YEARS
 
1.      NEW MINIMUM ENTRY REQUIREMENTS
(i)   Candidates must hold the minimum entry requirement for ND programme in the specific field.
(ii)  They must possess the National Diploma of the Federal Polytechnic Nekede, Owerri or the equivalent from recognised institutions in the appropriate discipline with minimum of Lower Credit (CGPA 2.50) Candidates with Pre-ND and National Diploma in AC, BAM, SA, EE, ME, FT, STA from other institution must have a minimum CGPA of 2.75 at ND level
(iii) They must have, by the expected date of admission, completed a minimum of twelve (12) Calendar months Post National Diploma Industrial Work Experience to the field of study.
(iv)  For candidates with pass level from the FEDERAL POLYTECHNIC, NEKEDE (ONLY), with CGPA not below 2.00 points, a minimum of two years post-ND cognate working experience is required
 
2.      AVAILABLE PROGRAMME FOR HND (MORNING/EVENING/ WEEKEND)
 
        I.                        Accountancy (AC).
     II.                        Business Administration & Management  (BAM)
   III.                        Banking and Finance (BF)
  IV.                        Marketing (MK)
     V.                        Purchasing and Supply (PS)
  VI.                        Public Administration (PA)
VII.                        Co-operative Economics And Management (CEM)
VIII.                        Office Technology and Management (OTM)
  IX.                        Agricultural Engineering (AE)
(a)  Farm Power &Machinery (option)
(b)  Soil or water resources Engineering (option)
(c)  Cost Harvest Engineering (option)
     X.                        CIVIL ENGINEERING (CE)
(a)    Structural Engineering (option)
(b)   Transportation Engineering (option)
  XI.                        ELECTRICAL/ELECTRONICS ENGINEERING (EE)
(a)  Power (option)
(b)  Telecommunication (option)
XII.      MECHANICAL ENGINEERING (ME)
(a)  Production engineering (option)
(b)  Air-conditioning and Refrigeration Building Services (option)
(c)  Automotive engineering (option)
XIII.     Architecture (AR)
XIV.    Building technology (BT)
XV.      Estate management (EM)
XVI.    Urban and Regional planning (URP)
XVII.   Food Technology (FT)
XIX.    Science Technology (ST)
a)      Biology/Microbiology (option)
b)      Chemistry(option)
c)      Physics Electronics (option)
d)      Environmental Biology (option)
e)      Microbiology/Biochemistry(option)
 
XX.           Library science (LS)
DOCUMENTS REQUIRED
Candidates should arrange with their previous institutions to send their academic transcripts directly to the Polytechnic. Candidates offered admission must present terminal reports showing completion of the 12 or 24 months industrial work experience before they would be registered.
B. NATIONAL DIPLOMA (EVENING/WEEKEND)
1.         GENERAL MINIMUM ENTRY REQUIREMENTS
Candidates with one of the following qualifications may be considered for admission into ND Programme:
i.                    SSC/WBSCSTAGE II/NABTEC/NECO with credit in five subjects relevant to the programme obtained at not more than two sittings.
ii.                  A pass at the final examination of the pre-ND of The Federal Polytechnic, Nekede, Owerri.
3.      AVAILABLE PROGRAMME FOR (EVENING/WEEKEND)
        I.            Accountancy (AC)
     II.            Business Administration and Management (BAM)
   III.            Banking and finance (BF)
  IV.            Marketing (MK)
     V.            Purchasing and Supply (PS)
  VI.            Public Administration (PA)
VII.            Co-operative Economics and Management (CEM)
VIII.            Office Technology and Management (OFT)
  IX.            Agricultural  Engineering (AE)
     X.            Civil Engineering (CE)
  XI.            Electrical/Electronics Engineering (EE)
XII.            Mechanical Engineering (ME)
XIII.            Computer science (CS)
XIV.            Food Technology (FT)
XV.            Library  Science (LS)
XVI.            Science Technology (ST)
XVII.            Fishery Technology
XVIII.            Statistics (STA)
XIX.            Architecture(AR)
XX.            Building Technology (BT)
XXI.            Estate Management(EM)
XXII.            Quantity Surveying(QS)
XXIII.            Surveying and Geo- informatics (SUG)
XXIV.            Urban and Regional Planning (URP)
REVISED ACADEMIC REQUIREMENTS FOR
FEDERAL POLYTECHNIC, NEKEDE OWERRI.
 
A.        SCHOOL OF BUSINESS AND MANAGEMENT TECHNOLOGY.
I. ACCOUNTANCY
II. BANKING AND FINANCE.
Minimum Requirement: Five credit in English language, Mathematics, and any three of the following subjects: Economics, Business methods, Principles of Accounts/Accounting, Literature in English, Commerce, History, Government, Statistics, Geography, Office Practice, one science subject, Information Communication Technology.
2.  (I)   BUSINESS ADMINISTRATION AND MANAGEMENT
    (II)   MARKETING
    (III) PURCHASING AND SUPPLY
    (IV) PUBLIC ADMINISTRATION
    (V)   CO-OPERATIVE ECONOMICS AND MANAGEMENT
Minimum Requirement: Five credit in English language, Mathematics and any three of the following subjects, Economics, Business method, Principle of Account/Accounting, Literature in English, Commerce, History and Government, Statistics ,Geography, Office practice/Secretarial Duties, One science subject, Christian Religious Studies Information Communication Technology. 
3. OFFICE TECHNOLOGY AND MANAGEMENT

Minimum Requirement: Five credit in English language, a science subject (Physics, Chemistry, Biology/Agricultural science, Health Science, Home  Economics) and any three from  Economics, Business Method, Literature in English, Commerce, History Government, Statistics, Geography, Christian Religious Studies, Principle of Accounts/Accounting. Office Practice/Secretarial Duties, Typewriting and Shorthand, Information Technology, Mathematics or any language.  A pass in Mathematics is compulsory.
UTME SUBJECT COMBINATION FOR DEPARTMENT IN THE SCHOOL OF MANAGEMENT AND TECHNOLOGY

1
Accountancy.
Mathematics and any two of Geography, Commerce, principle of Accounts/Accounting and Economics.
Federal Polytechnic Nekede accepts Economics/Commerce principle of Accounts/Accounting.
2
Banking And Finance.
Same as in Accountancy.
 
3
Business Administration And Management
Same as Accountancy.
 
4
Public Administration.
Government, History and Economics.
Federal                                 Polytechnic Nekede
requires, Mathematics and any of Geography, Literature, English and Commerce as UTME subject combination.
5
Co-Operative Economics And Management.
Mathematics and any two Economics, Geography, History, government or Principles of Accounts/Accounting.
 
6
Office Technology And Management.
Any three of Mathematics, Economics/Commerce, History/Government, Geography, Christian Religious Studies/Islamic Studies, Principle of Account/Accounting.
 
7
Marketing
 
Federal                                 Polytechnic Nekede accepts Economics as a requirement for Admission.
ACADEMIC REQUIREMENTS
B.        SCHOOL OF ENGINEERING TECHNOLOGY.
1. AGRICULTURAL ENGINEERING (AE)
Minimum Requirement: Five credit in Mathematics, Physics and any three from Biology/Agricultural science, Chemistry, Technical drawing, Geography, Economics/Commerce, Further Mathematics, Food and Nutrition, Basic Electrical/Electronics, Auto mechanics, English language. A pass in English language and Chemistry is required.
2. I.      ELECTRICAL/ELECTRONICS ENGINEERING (EE)
    II.    CIVIL ENGINEERING (CE)
    III.   MECHANICAL ENGINEERING (ME)
Five credit from Mathematics, Physics, Chemistry and any two from Biology/Agricultural science, Engineering drawing/Technology Drawing, Geography, Economics/Commerce, Basic Electronics, Metal work, Wood Work, English language. A pass in English language is required.
3. COMPUTER SCIENCE (CS)
Five credit in Mathematics, Physics, English language and two from statistics, Further Mathematics, Chemistry, Economics/Commerce, Biology/Agricultural science, Government/History, Technical drawing, Information Communication technology (ICT).
 
UTME SUBJECT COMBINATION FOR DEPARTMENTS IN SCHOOL OF ENGINEERING.

S/NO
DEPARTMENT
UTME SUBJECT COMBINATION
 
REMARK
1
Electrical/Electronics
Mathematics, Physics, Chemistry/Technical Drawing.
 
 
2
Mechanical Engineering
Mathematics, Chemistry, Physics/Technical Drawing.
 
 
3
Civil Engineering
Mathematics, Physics/Technical Drawing or Chemistry.
 
 
4
Agricultural Engineering
Mathematics and Physics/Technical Drawing, Chemistry or Biology/Agricultural science.
 
 
5
Computer Science
Mathematics and any two of Geography, Physics, Economics and Chemistry.
 
 
 
C.        SCHOOL OF ENVIRONMENTAL DESIGN AND TECHNOLOGY
1. ARCHITECTURE
MINIMUM REQUIREMENTS: Mathematics, Physics/Chemistry and any other three from English Language, Physics, Chemistry, Biology/Agricultural Science, Geography, Economics, Religious Knowledge, Technical Drawing and Fine Art. A pass in English Language is required.
2. BUILDING TECHNOLOGY
MINIMUM  REQUIREMENTS: Mathematics, Physics/Chemistry and three of Geography Economics, Technical Drawing/Art, Wood work metal work, Biology/Agric science, English Language. A pass in English language is required.
3. ESTATE MANAGEMENT
MINIMUM REQUIREMENTS: English Language, Mathematics, one basic Science (Physics, Chemistry, Biology) and two others taken from Economics, Geography, Accounting/Principle of Accounts, Fine Arts, Technical Drawing, Physics, Chemistry, Biology/Agricultural science, History/Government, literature in English, Wood work and Metal Work.
4. QUANTITY SURVEYING
MINIMUM REQUIREMENTS: Five credits in Mathematics, Physics and three of Chemistry, Geography, Technical drawing/Fine art, English language, Metal work, Biology/ Agricultural science, Economics/commerce. A pass in English Language is required.
5. SURVEYING AND GEO-INFORMATICS
MINIMUM REQUIREMENTS: Five credits in Mathematics, Physics, and any three of Further Mathematics/Statistics, Chemistry, Geography, Technical Drawing/Fine Art, Literature-in-English/English language, Economics/Government, any other science subject. A Pass in English language is required.
6. URBAN AND REGIONAL PLANNIG (URP).
MINIMUM REQUIREMENT: Five credits in , Mathematics, a science subject and three other subject chosen from English language, Economics, Geography, Art/Technical drawing, Statistics, Chemistry, Physics, Biology/ Agricultural  Science, History/Government. A pass in English language is required.
   
UTME SUBJECT COMBINATION FOR DEPARTMENTS IN SCHOOL OF ENVIROMENTAL DESIGN

S/NO
DEPT.
UTME SUBJECT COMBINATION
 
REMARK
1
Architecture
Physics, Mathematics and any of Chemistry, Geography, Art, Biology, Economics, Technical drawing.
 
 
2
Building Technology
Mathematics, Physics or Technical drawing, Chemistry or Fine Arts.
 
 
3
Surveying And Geo-Informatics
Mathematics, Physics and any one of Technical drawing, Chemistry.
 
 
4
Estate Management
Mathematics, and two of Economics, Arts, Technical drawing, Physics, Chemistry, Biology.
 
 
5
Quantity Surveying
Any three of Physics, Mathematics, Geography/Economics, Biology/Agric Science.
 
 
6
Urban And Regional Planning
Mathematics, Chemistry and Physics.
 
 
 
D.        SCHOOL OF INDUSTRIAL PLANNING AND APPLIED SCIENCE.
1. FOOD TECHNOLOGY (FT)
MINIMUM REQUIREMENT: Five credits in Mathematics, Chemistry, Biology/Agricultural science and any two of Physics, Economics, Statistics, English language, Additional Mathematics, Food and Nutrition/Hotel and Catering, Geography, Basic Electrical, Food services. Bakery and Confectionaries. Passes in Physics and English language are required.
2. LIBRARY SCIENCE (LS)
MINIMUM REQUIREMENT: Five credits in English Language and other four subjects with passes in Mathematics and one science subjects.
3. SCIENCE TECHNOLOGY (ST)
MINIMUM REQUIREMENT: Five credits in Mathematics,  Physics, Chemistry, Biology/Agricultural science and any one from the following; Economics/Geography, English language, Literature in English, Government/History and  Technical drawing.
4. FISHERIES TECHNOLOGY (FIT)
MINIMUM REQUIREMENT: Five O/Level credits in Biology/Agricultural, Chemistry and any three of Statistics, Geography, Mathematics, Economics/Commerce/Government, Physics. At least a pass in English language is required.
5. STATISTICS (STA)
MINIMUM REQUIREMENT: Five O/Level credits in Mathematics, Physics/Chemistry/Biology and any three of Statistics, Geography, Further Mathematics, Chemistry, Physics, History, Economics, Biology/Agricultural Science, Technical drawing, Government/History. A pass in English Language is required.
 
UTME SUBJECT COMBINATION

S/NO
DEPARTMENT
UTME SUBJECT COMBINATION
 
REMARK
1.
Food Technology
Biology/Agricultural science and two of the following; Physics, Chemistry, Mathematics and Economics.
 
 
2.
Science Technology
Mathematics and any two of Biology/Agricultural Science/Chemistry/Physics.
 
 
3.
Fisheries
Biology/Agricultural science and any two of Physics, Chemistry, Mathematics and Economics.
 
 
4.
Statistics
Mathematics and any two of the following; Geography, Physics, Economics and Chemistry, Biology.
 
 
5
Library Science
Any three subjects.
 
 
E.        SCHOOL OF HUMANITIES AND SOCIAL SCIENCE
MASS COMMUNICATION
MINIMUM REQUIREMENTS: English language, Mathematics, a science subject, (Physics, Chemistry, Biology/Agricultural Science) and any two subject from Government, literature in English, Geography, Commerce, Economics, Igbo, Christian Religious Studies, Fine art and History, Information communication Technology.
 
UTME SUBJECT COMBINATION
 

S/NO
DEPARTMENT
UTME SUBJECT COMBINATION
 
REMARKS
1
Mass Communication
Any three subject from Arts/Social Science/Physical Science.
 
 
CERTIFICATE PROGRAMS (CONTINUING EDUCATION CENTER)(CEC)
AVAILABLE COURSES AND GENERAL ENTRY REQUIREMENT
A.    SCHOOL OF BUSINESS AND MANAGEMENT TECHNOLOGY
1.         Certificate programme in:
Accounting, Insurance, Finance and Investment, Public  Administration, Salesmanship, Purchasing and supply, Secretarial Administration (CSIV/Secretarial Assistance II) and Intermediate certificate in Secretarial Administration (CSIII Secretarial Assistance I)
Duration-1 Academic year
Entry Qualification:
A minimum of four passes including Mathematics and English language at SSC/GCE/NECO/NABTEB/TC II (OR EQUIVALENT OBTAINED AT NOT MORE THAN TWO SITINGS). Candidates with JSSC with not less than certified five years working experience in related fields will be considered. For Secretarial Administration a pass in Mathematics is not mandatory.
2.      Advanced certificate Programme
Accountancy, Insurance, Banking and Finance, Public Administration, Salesmanship, Purchasing & stores, Secretarial Administration, (CS II/Senior Secretarial Assistance).
Duration-1 Academic year
Entry Qualifications:
a)         A minimum of four passes in relevant subject obtained in not more than two in SSC/NECO/NABTEB/TCII, or equivalent, two of which must be at credit level. A credit in English language and a pass in Mathematics are required.
b)         Relevant polytechnic Certificate in programmes listed in (A 1) above
B.        SCHOOL OF ENGINEERING TECHNOLOGY
1.         Certificate Programmes in
Electrical installation work and Regulation, Electrical installation, Design and Draughting, Radio and TV servicing and installation, Telecommunication, Machine Tool Practice, Air-Conditioning and Refrigeration, Vehicle maintenance.
 
 
Duration 1-Academic year
Entry qualification:
Any of
1.   i.    Trade test I and II with two years full apprentice of Experience
     ii.   SSCE/GCE/NECO/NABTEB with passes in four relevant subjects including English language and Mathematics.
     iii. JSSC with 3 year relevant industrial Experience.
    iv.   Artesian with minimum of 5 year working Experience in the relevant field.
 2.        Advanced Certificate Program in:
Installation work and regulation, Electrical Design and Draught, Radio and TV servicing and Installation, Telecommunication, Machine Tool Practice, Air –conditioning and Refrigeration, Vehicle Maintenance.
Duration- 1 Academic year
Entry qualification:
i.    Possession of the Polytechnic Certificate in relevant programmes as listed in (B 1) above or other certificates considered by the Polytechnic as Equivalent.
ii. A minimum of city and guild craft or WAEC Technical part in the relevant field.
 
A.    SCHOOL OF ENVIRONMENTAL DESIGN & TECHNOLOGY
 
1.         Certificate Programmes in
Architectural Draughtsmanship, Architectural modelling Techniques, Building technology, Quantity surveying, Land surveying, Housing and Transportation, Landscape Planning & Town planning Model Making, Town Planning/Design, Public Utilities and Services, Tourism and Recreation planning.
Duration-1 Academic year
Entry qualification: 
(i)   A minimum of four passes in English language in SSCE/GCE/NECO/NABTEB/TC II obtained in not more than two sittings.
(ii)    Candidates with JSSC or equivalent and with not less than five years Working experience in relevant fields will be considered.
a.       Advanced Certificate Programmes in:
Architecture Draughtsman ship, Architecture Modelling Techniques, Building Technology, Quantity surveying, Construction management, land Surveying, Housing and Transportation, Utilities and Services, Tourism and Recreation planning.
Duration -1 Academic year.
Entry qualification:
The Polytechnic Certificate in the relevant field or any other certificate adjudged by the polytechnic as equivalent.
B.     SCHOOL OF GENERAL STUDIES:
 
1.      Certificate programme in:
Mass communication, Computer Appreciation & Operations, Computer maintenance and Networking.
Duration 1- Academic year
Entry qualification:
i.                    A minimum of four passes including credit in English language in SSCE/GCE/NECO/NABTEB/TC II obtained at not more than two sittings.
ii.                  For computer, candidates with JSSC plus acceptable working experience may be considered.
 
2.      Advanced Certificate Programme in Mass communication
Duration 1- Academic year
Entry qualification:
(i)      Polytechnic Certificate in Mass communication,
(ii)     Four Passes of which three must be at credit level; including English language obtained at not more than two sittings  SSCE/GCE/NECO/NABTEB/TC II.
C.    OTHER AVAILABLE CRETIFICATE COURSES                  DURATION
1.      Certificate in Electric Motor Renewing & Repairs                             12 Weeks
2.      Certificate in Electrical Installation                                                    12  Weeks
3.      Certificate in Advanced Electrical installation                                   26 Weeks
4.      Certificate in Geographical Information System (GIS)                      26 Weeks
5.      Certificate in Fisheries Technology                                                    12 Weeks
6.      Certificate in Auto Mechanics                                                            36 Weeks
7.      Certificate in Welding & Fabrication                                                 36 Weeks
8.      Certificate in Fitting & Machining                                                     36 Weeks
9.      Certificate in Foundry                                                                                    36 Weeks
10.  Certificate in Refrigeration & Air-conditioning                                 36 Weeks
11.  Certificate in Computer Literacy                                                        3 Months
12.  Certificate in Computer Operation                                                     6 Months
13.  Certificate in Computer Maintenance                                                 6 Months
14.  Certificate in Information Communication Technology                     1 Year
F.         EXECUTIVE PROGRAMME TAILORED TOWARD THE NEED AND CONVENIENCE OF THE CANDIDATES/ INSTITUTION
Available For:
1.      Corporate Bodies
2.      Institutions
3.      Individuals
G.        SPECIALIZED PROGRAMME FOR CANDIDATE WITH BASIC COMPUTER KNOWLEDGE
(i )        Basic Programming                 )
            Visual Basic (VB)                    )     6 months
            Visual Basic Net (VB NET) 
(ii)        Visual C
(iii)       Autocad for
Architects
Mechanical Engineers
Electrical Engineers
Structural Engineers
 
(iv)       Web Design                                 )
            Internet Access                            )  
            Networking JAVA                       )     - 6 months
            Hypertext Mark-up language       )
 
Admission Requirements on E and F:
The minimum entry requirement is First School Leaving Certificate. However those who have School Certificate or equivalent shall be appropriately placed in the programme.
 
METHOD OF APPLICATION           
Payment for admission forms are made through eTranzact in any branch of the following designated Banks at the cost of N5,000 (five thousand naira) only, while that of certificate is N3,000 (three thousand naira only).

SCHOOLS
BANKS
School of  Business  & Management Tech           (Morning) 
 
Fidelity Bank (4010468549)
All Evening Programmes
Intercontinental Bank (0104303734)
School of  Environmental Design & Tech        (Morning)
 
School of  Industrial & Applied Sciences          (Morning)
 
FCMB (0286043022)
All Weekend Programmes and Certificate Courses
Zenith Bank (6014914544)
School of Engineering Tech.                             (Morning)
 
School of Humanities & Social Sciences            (Morning)
 
Post-HND URP
UBA (1015498529)
 
CHOICE OF PROGRAMME
Candidate are advised to ensure that their programmes of first and second choice are selected from department were they met the minimum entry requirement. The programme should be clearly indicated. Candidates should also note that the number of available places in any of the programmes is limited. The possession of the minimum entry qualification, therefore, does not necessarily guarantee admission.

The closing date for the completion of forms online is Friday 29th July 2011.Applicants should fill their forms online  Click Here to Apply
I. M .ALIGBE
REGISTRAR

No comments:

Post a Comment